EKGR16698 – 18 oz. Aerosol
Helpful Tip
For outdoor applications, use in temperatures between 65°F and 85°F and away from strong breezes and direct sunlight. This product may not be compatible with all surfaces and all conditions surrounding application. Before applying to any surface, always test product in a small, inconspicuous area to ensure no damage will result. Be careful of runs, drips and overspray and keep in mind that the treated area will look cleaner than the surrounding areas. If a second application does not remove shadows and stains, a high-pressure water sprayer may be needed.
OTHER Discontinued PRODUCTS
- AIRCRAFT® Non-Methylene Chloride Paint Remover
- CARB Compliant General Purpose Automotive Lacquer Thinner
- Color Change Stripper
- Concentrated Cleaner & Stain Remover
- D-Lead® Paint Surface Cleaner
- D-Lead® Paint Test Kit
- D-Lead® Wipes
- Glass & Surface Cleaner
- Gum & Adhesive Remover
- Industrial Maintenance Coating Thinner
- KS-Pro™ Paint Thinner
- Lacquer Thinner Premium
- M.E.K. (Methyl Ethyl Ketone)
- Metal & Masonry Paint Remover
- Mildew Stain Remover
- Mineral Spirits for SCAQMD
- Muriatic Acid
- Natural Multi-Purpose Solvent
- Odorless Painter’s Solvent for SCAQMD
- Paint Clean-Up
- Paint Clean-Up for California
- Paint Thinner Aerosol
- Rust Converter
- Rust Remover
- Sticker Shock
- TSP Substitute
- Turpatine
- White Formula Paint Thinner
- Wood Bleach (DISCONTINUED)
Graffiti Remover
Klean-Strip® Graffiti Remover is a biodegradable, non-caustic formula that removes multiple layers of graffiti from unpainted surfaces, such as glass, metal, masonry, concrete, and wood. This fast-acting formula clings to vertical surfaces and works without scrubbing.
IMPORTANT SAFETY NOTICE:
Click link to learn more about Hazards of Using Paint Removers for Bathtub Refinishing Operations
Though this product is no longer available for sale, we continue to provide the “Directions for Use” and product documentation to support Klean-Strip® customers who have previously purchased this product.
Directions For Use:
- Wear chemical-resistant gloves and chemical splash goggles. Be observant of torn gloves or other accidental skin contact since no burning or stinging sensation is immediately experienced.
- Shake well. Hold the can upright and approximately 10" from the surface. Point the arrow on the spray button away from you. Using a back and forth motion, apply a generous coat over the graffiti.
- Leave the area and allow 15 – 30 minutes for the remover to penetrate and loosen the graffiti. If applying to a vertical surface, begin at the bottom to prevent breathing vapors which accumulate near the ground.
- Use a non-metallic scraper or stripping brush to lift off loosened graffiti. Residue can be removed with a coarse rag dipped in warm soapy water.
- If some graffiti shadows remain, a second application may be needed.
IMPORTANT: Carefully read all cautions and directions before use.
DISPOSAL: Dispose of in accordance with local, state and federal regulations.
DANGER! FLAMMABLE. EYE & SKIN IRRITANT. VAPOR HARMFUL. Keep away from heat, sparks, flames and all other sources of ignition. USE ONLY WITH ADEQUATE VENTILATION TO PREVENT BUILDUP OF VAPORS. Do not use in areas where vapors can accumulate and concentrate such as basements, bathrooms, and small, enclosed areas. Whenever possible use outdoors in an open air area. If using indoors open all windows and doors and maintain a cross ventilation of moving fresh air across the work area. If strong odor is noticed or you experience slight dizziness – STOP – ventilation is inadequate. Leave area immediately. IF THE WORK AREA IS NOT WELL VENTILATED, DO NOT USE THIS PRODUCT. A dust mask does not provide protection against vapors.
CONTENTS UNDER PRESSURE. Do not puncture or incinerate. Do not store at or expose to temperatures above 120˚F. Contains N-Methyl 2-Pyrrolidone and Dibasic Esters. Avoid contact with eyes and prolonged contact with skin. Do not take internally. WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive harm.
FIRST AID - IF SWALLOWED, call your poison control center, hospital emergency room or physician immediately for instructions.
IN CASE OF EYE CONTACT, immediately flush with water, remove any contact lens, continue flushing with water for at least 15 minutes then get immediate medical attention.
IN CASE OF SKIN CONTACT, irritation may result. Immediately wash with soap and water. If irritation persists, get medical attention.
KEEP OUT OF REACH OF CHILDREN
MAX V.O.C. < 50% by weight
The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.