Follow the coating manufacturer’s instructions for the proper amount of Industrial Maintenance Coating Thinner required. We recommend starting with a ratio of 4 ounces per gallon.

IN THE STATE OF CALIFORNIA, TO BE USED ONLY IN THE THINNING OF
INDUSTRIAL MAINTENANCE COATINGS.

IMPORTANT: Carefully read all directions, notes and cautions prior to use. Only use this product as directed on the label. Do not apply to floors or any other large surface areas because fire and health safety risks will increase dramatically. Protect eyes with chemical splash goggles and avoid prolonged skin contact.

STORAGE: Do not use or store this product near any source of heat or open flame, furnace areas, pilot lights, stoves, etc. Keep it in a cool, dry place, out of direct sunlight, at temperatures below 120˚. Keep container closed when not in use. Do not reuse this container.

DISPOSAL: If container is corroded, rusted or shows signs of deterioration, dispose of product. Dispose of empty cans and leftover product at your local household hazardous waste collection facility. If one is not available, dispose of in accordance with federal, state and local regulations.

DANGER! FLAMMABLE. KEEP AWAY FROM HEAT, SPARKS, FLAME AND ALL OTHER SOURCES OF IGNITION. VAPORS MAY CAUSE FLASH FIRE OR IGNITE EXPLOSIVELY. VAPORS MAY TRAVEL LONG DISTANCES TO OTHER AREAS AND ROOMS AWAY FROM WORK SITE. Do not smoke. Extinguish all flames and pilot lights, and turn off all stoves, heaters, electric motors and all other sources of ignition during use and until all vapors are gone.

USE ONLY WITH ADEQUATE VENTILATION TO PREVENT BUILDUP OF VAPORS. Do not use in areas where vapors can accumulate and concentrate such as basements, bathrooms and small, enclosed areas. Whenever possible use outdoors in an open air area. If using indoors open all windows and doors and maintain a cross ventilation of moving fresh air across the work area. If strong odor is noticed or you experience slight dizziness - STOP - ventilation is inadequate. Leave area immediately.

IF THE WORK AREA IS NOT WELL VENTILATED, DO NOT USE THIS PRODUCT. A dust mask does not provide protection against vapors.

DANGER! HARMFUL OR FATAL IF SWALLOWED. VAPOR HARMFUL. EYE AND SKIN IRRITANT. Contains Petroleum Distillates and Ethyl Acetate. Reports have associated repeated and prolonged overexposure to solvents with neurological and other physiological damage. Intentional misuse of this product by deliberately concentrating and inhaling vapors can be harmful or fatal. Avoid breathing of vapors or mist and contact with skin, eyes and clothing. Do not take internally. WARNING: Using this product will expose you to chemicals which are known to the State of California to cause cancer and reproductive harm.

FIRST AID – IF SWALLOWED, do not induce vomiting. Immediately call poison control center, hospital emergency room or physician.

IN CASE OF EYE CONTACT, immediately flush with water, remove any contact lens, continue flushing with water for at least 15 minutes, then get medical attention.

IN CASE OF PROLONGED SKIN CONTACT, wash thoroughly with soap and water. If irritation persists, get medical attention.

KEEP OUT OF REACH OF CHILDREN

SDS
CPSIA

How is Klean Strip® Industrial Maintenance Coating Thinner used?
It is designed to thin Industrial Maintenance Coatings (which are used in the industrial market more as protective coatings and less for visual appearance).

What solvents is this a substitute for?
It can be used in place of M.E.K., Toluene, Xylene, and VM&P Naphtha.

What is the shelf life of Klean Strip® Industrial Maintenance Coating Thinner?
The shelf life is three years unopened and six months after opening.

Industrial Maintenance Coating Thinner - Gallon

The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.