EKGS75016

EKGS75016 – 32 FL OZ


Helpful Tip

Test in an inconspicuous area before use on any plastic or synthetic surface as strippers can damage these surfaces. For best results, use in temperatures between 65° and 95°F and away from strong breezes and hot sun. Protect surrounding areas with a heavy plastic drop cloth.


OTHER KS Green® PRODUCTS

Klean Strip® Green® Paint & Varnish Stripper

Klean-Strip® Green® Paint & Varnish Stripper contains no Methylene Chloride or N-Methylpyrrolidone. It is low odor, safe for indoor use and stays wet and active up to 24 hours. Use to strip multiple layers of latex paint, oil-based paint, varnish, lacquer, wax and stain from wood, metal and masonry surfaces.

   

1. Protect hands with chemical-resistant gloves and eyes with chemical splash goggles. 2. Shake well. Apply a thick coat. 3. After 30 minutes, scrape a small test area to see if finish is ready for removal. Let the stripper do the work. For oil-based coatings allow additional time up to 24 hours. Gently scrape in direction of wood grain with a plastic stripping tool. For stubborn areas, use an abrasive  tripping pad sprayed with Klean-Strip® Green® Paint & Varnish Stripper. A toothbrush, toothpick or stripping brush will help remove old finish buried in recesses. 4. You may use water as a wash to remove remaining residue. Surface should be completely clean and dry before refinishing.

IMPORTANT: Carefully read all directions, notes and cautions prior to use. Only use this product as directed on the label. Wash arms and hands after use even if gloves are worn. Use only with adequate ventilation to prevent build up of vapors. CLEAN UP: The work area and tools can be cleaned up with soap and water. DISPOSAL: If container shows signs of deterioration, dispose of product. Dispose of leftover product at your local household hazardous waste collection facility. If one is not available, dispose of in accordance with federal, state and local regulations. STORAGE: Keep dry in a cool place. Avoid exposure to high temperatures or prolonged exposure to sun. Keep from freezing. Keep container closed when not in use.

CAUTION: EYE AND SKIN IRRITANT. Contains water (7732-18-5); benzyl alcohol (100-51-6); polyoxyethylene sorbitan monolaurate (20) (9005-64-5); proprietary acrylic polymer; and potassium hydroxide (1310-58-3). Avoid contact with eyes and skin. Do not take internally. Use in a well ventilated area.


FIRST AID:

IF SWALLOWED, call your Poison Control Center (1-800-222-1222), hospital emergency room or physician immediately for instructions.

IN CASE OF EYE CONTACT, immediately flush with water, remove any contact lens; continue flushing with water for at least 15 minutes, then get immediate medical attention.

IN CASE OF SKIN CONTACT, irritation may result. Immediately wash with soap and water. If irritation persists, get medical attention.


KEEP OUT OF REACH OF CHILDREN.

SDS

The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.