GKWS960SC

GKWS960SC – GALLON
QKWS961SC – QUART


Helpful Tip

Do not apply to floors or any other large surface areas because fire and health safety risks will increase dramatically.


OTHER Kwik-Strip™ Strippers PRODUCTS

Kwik-Strip™ Paint & Varnish Stripper for California

KWIK-STRIP™ Paint & Varnish Stripper is a patent-pending, non-methylene chloride formula that strips 5 layers of latex paint in 15 minutes.  Strips 5 layers of oil/alkyd paint in 45 minutes.  Works on wood, metal and masonry.  Brushable formula clings to surface.  Will not raise wood grain.

WARNING: This product can expose you to chemicals including Ethylbenzene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

IMPORTANT SAFETY NOTICE:
Click link to learn more about How to Strip Paint Safely.

   

1. Shake well.

2. Pour into a metal container and apply a thick coat with a paint brush to a small area (up to 3 ft. x 3 ft.). Brush in one direction only. Leave the area and let the stripper do the work.

3. After 15 minutes, test scrape a small area to see if finish is ready for removal. Remove loosened finish by gently scraping in direction of wood grain with a plastic stripping tool. A toothbrush, toothpick or stripping brush will help remove old finish buried in recesses. Multiple coats or stubborn finishes may require repeat application.

4. Use a clean abrasive pad dipped in After Wash or Odorless Mineral Spirits to loosen remaining finish and remove any residue. Surface should be completely clean and dry before refinishing.

DANGER! EXTREMELY FLAMMABLE. VAPORS MAY CAUSE FLASH FIRE OR IGNITE EXPLOSIVELY. KEEP AWAY FROM HEAT, SPARKS, FLAME, AND ALL OTHER SOURCES OF IGNITION. Extinguish all flames and pilot lights, and turn off all stoves, heaters, electric motors and all other sources of ignition during use and until all vapors are gone. Do not smoke. Keep away from electrical outlets and switches. Beware of static electricity generated by synthetic clothing and other sources. USE ONLY WITH ADEQUATE VENTILATION TO PREVENT BUILDUP OF VAPORS. Do not use in areas where vapors can accumulate and concentrate such as basements, bathrooms and small, enclosed areas. If using indoors, open all windows and doors and maintain a cross ventilation of moving fresh air across the work area. If strong odor is noticed or you experience dizziness – STOP – ventilation is inadequate. Leave area immediately. IF THE WORK AREA IS NOT WELL VENTILATED, DO NOT USE THIS PRODUCT.

DANGER! HARMFUL OR FATAL IF SWALLOWED. CAUSES BURNS. VAPOR HARMFUL. Contains Acetone and Xylene. Reports have associated repeated and prolonged over-exposure to solvents with neurological and other physiological damage. The risk to your health depends on the level and duration of exposure. Intentional misuse of this product by deliberately concentrating and inhaling vapors can be harmful or fatal. Avoid breathing vapors or mist and contact with skin, eyes, and clothing. Do not swallow. 

FIRST AID:

IF SWALLOWED, do not induce vomiting. Immediately call the Poison Control Center (1-800-222-1222), hospital emergency room or physician for instructions.

IN CASE OF EYE CONTACT, immediately flush with water, remove any contact lens, continue flushing with water for at least 15 minutes, then get immediate medical attention.

IN CASE OF SKIN CONTACT, immediately wash with soap and water. If irritation persists, get medical attention.


KEEP OUT OF REACH OF CHILDREN.


DO NOT USE TO STRIP BATHTUBS.

Product Category: Paint Remover

Max VOC: 50%

SDS

The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.