QWN285 – Quart
Helpful Tip
People with sensitive skin should wear chemical-resistant gloves. Product will leave a slight residue that can be painted over. Do not use on freshly finished surfaces, rubber or asphalt tile, synthetics, plastic, fiberglass or other solvent-sensitive surfaces.
OTHER KS Cleaning And Surface Prep PRODUCTS
Liquid Sandpaper
A fast, easy and non-messy alternative to sanding, Klean-Strip® Liquid Sandpaper is an effective way to prepare surfaces for painting and increase the adhesion of new finishes to old. The water-based, biodegradable formula works on paint, varnish, enamel and stain and is great when you are redoing kitchen cabinets, wood moldings and door facings.
- Wear chemical splash goggles. Shake well. Use full strength to saturate a coarse, lint-free cloth and rub surface in a circular motion. Fold and re-saturate cloth frequently to prevent re-depositing of soils. Kitchens and areas with heavy grease or wax build-up may require cleaning with TSP or a TSP substitute prior to using liquid sander.
- Apply new coating anytime after surface is dry (about 10 minutes).
IMPORTANT: Carefully read all cautions and directions before use.
STORAGE: Keep it in a cool, dry place, out of direct sunlight, at temperatures below 120°. Keep container closed when not in use. Do not reuse this container.
DISPOSAL: If container shows signs of deterioration, dispose of product. Dispose of empty container and leftover product at your local household hazardous waste
collection facility. If one is not available, dispose of in accordance with federal, state and local regulations.
CAUTION! HARMFUL IF SWALLOWED. EYE IRRITANT. Contains Dibasic Esters and Glycol Ether. Avoid contact with eyes, skin and mucous membranes. Do not take internally. Use only with adequate ventilation. If strong odor is noticed or you experience slight dizziness – STOP – ventilation is inadequate. Leave area immediately.
FIRST AID - IF SWALLOWED, immediately call your poison control center, hospital emergency room or physician for instructions.
IN CASE OF EYE CONTACT, immediately flush with water, remove any contact lens, continue flushing with water for at least 15 minutes, then get immediate medical attention.
IN CASE OF SKIN CONTACT, immediately wash with soap and water. If irritation persists, get medical attention.
KEEP OUT OF REACH OF CHILDREN
After I’ve applied Klean-Strip® Easy Liquid Sander Deglosser, do I need to rinse it off before painting?
Rinsing is not required — Klean-Strip® Easy Liquid Sander Deglosser should be left on the surface and allowed to dry for ten minutes. The surface can then be painted.
Where can I purchase Klean Strip® Easy Liquid Sander Deglosser?
Check the “Find A Retailer” link at the top right of this page to find a retailer locally. This product is typically sold in the paint section of hardware and home improvement stores.
I’m rubbing Klean Strip® Easy Liquid Sander Deglosser in a circular motion, according to the instructions, but the gloss isn’t coming off of the finish.
This is okay. As long as the product is applied properly, it will micro-etch the surface so that new paint will adhere.
What is the shelf life of Klean Strip® Easy Liquid Sander Deglosser?
The shelf life is three years unopened and six months after opening.
The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.