EKPS302SC - 16OZ

EKPS302SC – 16 OZ

Helpful Tip

Protect surrounding area from overspray with a heavy plastic drop cloth. Do not use on linoleum, plastic, rubber, asphalt tile,fiberglass or other synthetics. Removers may harm these surfaces. For best results, use in temperatures between 65°F and 85°F, and away from strong breeze and hot sun. If spray tip becomes clogged, remove from can and hold under hot water. Replace tip making sure arrow is aimed away from you.

OTHER KS Non-Methylene Chloride Premium Stripper PRODUCTS

Premium Stripper Aerosol Non-Methylene Chloride California

Klean-Strip® Premium Stripper Aerosol Non-Methylene Chloride for California is a patent-pending aerosol formula that takes 15 minutes to dissolve multiple layers.  It quickly removes latex and oil-based paint, and polyurethane from wood, metal and masonry surfaces. The convenient 16-oz. aerosol can is an excellent choice for small projects, fast, easy application and beautiful results.

WARNING: This product can expose you to chemicals including Ethylbenzene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.



Click link to learn more about How to Strip Paint Safely.


1. Wear chemical-resistant gloves and chemical splash goggles. 2. Shake well. Hold can in an upright position approximately 12" to 14" from surface. Point arrow on top of button away from you. Using a back-and-forth motion, apply a generous but even coat of remover to one small area at a time (up to 3 ft. x 3 ft.) because health safety risks will increase dramatically when used over large areas. 3. Allow time for remover to work. Do not rush job. Test a small area to see if finish is ready for removal. 4. Scrape off loosened finish by gently working in the direction of wood grain with a chemical-resistant plastic scraper. Wipe off sludge with rough cloth or medium steel wool. Repeat application if finish is particularly stubborn.

DANGER! CONTENTS UNDER PRESSURE. Do not puncture or incinerate. Do not store at or expose to temperatures above 120°F. Exposure to heat or prolonged exposure to sun can cause bursting.

DANGER! FLAMMABLE. VAPORS MAY CAUSE FLASH FIRE OR IGNITE EXPLOSIVELY. KEEP AWAY FROM HEAT, SPARKS, FLAME, AND ALL OTHER SOURCES OF IGNITION. Extinguish all flames and pilot lights, and turn off all stoves, heaters, electric motors and all other sources of ignition during use and until all vapors are gone. Do not smoke. Keep away from electrical outlets and switches. Beware of static electricity generated by synthetic clothing and other sources. USE ONLY WITH ADEQUATE VENTILATION TO PREVENT
BUILDUP OF VAPORS. Do not use in areas where vapors can accumulate and concentrate such as basements, bathrooms and small, enclosed areas. If using indoors, open all windows and doors and maintain a cross ventilation of moving fresh air across the work area. If strong odor is noticed or you experience dizziness – STOP – ventilation is inadequate. Leave area immediately. IF THE WORK AREA IS NOT WELL VENTILATED, DO NOT USE THIS PRODUCT. 

DANGER! HARMFUL OR FATAL IF SWALLOWED. EYE AND SKIN IRRITANT. VAPOR HARMFUL. Contains Dimethyl Carbonate, Xylene and aerosol propellant. Reports have associated repeated and prolonged over-exposure to solvents with neurological and other physiological damage. The risk to your health depends on the level and duration of exposure. Intentional misuse of this product by deliberately concentrating and inhaling vapors can be harmful or fatal. Avoid breathing vapors or mist and contact with skin, eyes, and clothing. Do not swallow.


IF SWALLOWED, do not induce vomiting. Immediately call the Poison Control Center (1-800-222-1222), hospital emergency room or physician for instructions.

IN CASE OF EYE CONTACT, immediately flush with water, remove any contact lens, continue flushing with water for at least 15 minutes, then get immediate medical attention.

IN CASE OF SKIN CONTACT, immediately wash with soap and water. If irritation persists, get medical attention. 



The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.