GKKP94407D – Gallon
OTHER Discontinued PRODUCTS
- Adhesive Remover
- AIRCRAFT® Non-Methylene Chloride Paint Remover
- Artists’ Solvent
- Brush Cleaner
- CARB Compliant General Purpose Automotive Lacquer Thinner
- Color Change Stripper
- Concentrated Cleaner & Stain Remover
- D-Lead® Paint Surface Cleaner
- D-Lead® Paint Test Kit
- D-Lead® Wipes
- Glass & Surface Cleaner
- Graffiti Remover
- Gum & Adhesive Remover
- Industrial Maintenance Coating Thinner
- Japan Drier
- Klean Kutter Refinisher
- Klean-Strip® Green® Safer Paint Thinner
- KS-Pro™ Paint Thinner
- Lacquer Thinner Premium
- M.E.K. (Methyl Ethyl Ketone)
- Metal & Masonry Paint Remover
- Mildew Stain Remover
- Mineral Spirits for SCAQMD
- Muriatic Acid
- Natural Multi-Purpose Solvent
- Odorless Painter’s Solvent for SCAQMD
- Paint Clean-Up
- Paint Clean-Up for California
- Paint Thinner Aerosol
- Premium Sprayable Stripper
- Premium Stripper
- Premium Stripper Aerosol
- Rust Converter
- Rust Remover
- Sticker Shock
- Strip-X® Stripper
- TSP Substitute
- Turpatine
- Wood Bleach (DISCONTINUED)
White Formula Paint Thinner
Klean-Strip® White Formula Paint Thinner is a revolutionary, safer paint thinner formula that thins, cleans and preps. It is milky-white in color and can be used to thin any color of oil-based paint, stain and varnish without affecting the color of the dried paint. It is also ideal for removing grease and dirt from metal, plastic, wood and painted surfaces so paint will adhere better. It is excellent for cleaning up after a painting project by removing paint spills and cleaning brushes, pans, buckets, rollers, stirring tools, foam applicators, and spray equipment. Nylon brushes are left soft and in great condition.
Though this product is no longer available for sale, we continue to provide the “Directions for Use” and product documentation to support Klean-Strip® customers who have previously purchased this product.
Directions For Use:
Use where mineral spirits or paint thinner is recommended for surface preparation, thinning or clean up.
Thinning Oil-based Coatings: Add gradually and stir thoroughly until desired consistency is obtained. Do not use to thin latex paint.
Cleaning Tools & Surfaces: Apply to an absorbent material such as a cotton cloth or rag and wipe. Wash hands with soap and water after use.
Cleaning Brushes & Rollers: Agitate brush or roller in product until all residue is dissolved. Press out excess, wipe with a clean towel, and lay flat to dry.
Cleaning Spray Guns: Follow spray gun manufacturer’s instructions.
STORAGE: Keep in a cool, dry place. Keep container closed when not in use. Do not reuse this container.
DISPOSAL: Dispose of in accordance with federal, state and local regulations.
IMPORTANT: Carefully read all directions, notes and cautions prior to use. Only use this product as directed on the label. Do not use for any other purpose. Protect eyes with chemical splash goggles and avoid prolonged skin contact. Could cause flaring of natural bristle brushes. Do not allow product to freeze. Contains Petroleum Distillates. Do not take internally.
FIRST AID - IF SWALLOWED, immediately call your Poison Control Center, hospital emergency room or physician for instructions.
IN CASE OF EYE CONTACT, immediately flush with water, remove any contact lens, continue flushing with water for at least 15 minutes, then get medical attention.
IN CASE OF SKIN CONTACT, wash with soap and water. If irritation persists, get medical attention.
RESPONSIBLE USE AND HANDLING OF ALL CHEMICALS CAN PREVENT HARM TO YOU AND THE ENVIRONMENT.
KEEP OUT OF REACH OF CHILDREN
The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.