Klean Strip® Concrete Stripper
We recommend using chemical-resistant gloves.
For oil-based coatings allow additional time, up to 24 hours, for the stripper to work. Test small area to see if finish is ready for removal.
After scraping up the paint and stripper residue, scrub the area with Klean Strip Concrete Degreaser and rinse well with water. Allow to dry. Then use Klean Strip Concrete Etch or follow coating manufacturer’s instructions before applying the coating. Floor should be completely clean and dry before refinishing.
Surfaces can be painted after using Klean Strip® Concrete Stripper. Surface should be completely clean and dry before refinishing.
Dispose of empty container and leftover product at your local household hazardous waste collection facility. If one is not available, dispose of in accordance with federal, state and local regulations.
